Atec Narda-EHP-50C - Manual (Page 3)

34 narda Safety Test Solutions an communications company USA • Germany • Italy
USA TEL: (1) 631 231-1700 • FAX: (1) 631 231-1711 • E-MAIL: [email protected] • www.narda-sts.us
Electric and Magnetic Field Measurement
EHP-50C Electric Field and Magnetic Flux Density Measurement
The Control Panel allows you to select the Sweep Span and
to Zoom into that span, evaluate Data with automatic peak
detection and marker display – and to save plots as graph-
ics or text, Mode selects either E or H fields, instantaneous
or “Maximum Hold”, Limit allows you to set and save limits,
Aspect allows setting of trace colors and label text.
PC Software
The supplied software is compatible with Windows TM and
allows fast analysis of detected fields in real-time or read-
ings previously stored by the EHP-50C. The EHP-50C is
supplied standard with a 2m fiber optic cable and a fiber
optic to USB adapter.
DESCRIPTION:
1 – EHP50 software release and firmware of connected analyzer.
2 – Displays frequency while scanning
3 – EHP-50C battery status
4 – Scan activation for each axis (default setting: all axis activated)
5 – Control panel
6 – Spectrum analysis display
2
3
4
5
6
1