Atec Narda-A8860-A8862-A8864 - Manual (Page 6)

Personal and Area Monitors
USA TEL: (1) 631 231-1700 • FAX: (1) 631 231-1711 • E-MAIL: [email protected] • www.narda-sts.com
GERMANY TEL: 49-7121-9732-777 • FAX: 49-7121-9732-790 • E-MAIL: [email protected] • www.narda-sts.de
50 Years of
Excellence
RF Safety
Test Solutions
an communications company
narda
Safety Test Solutions
Specifications
SERIES 8860 8861 8862 8864
Frequency Range 100 kHz to
100 GHz
10 MHz to
100 GHz
100 kHz to
100 GHz
100 kHz to
100 GHz
Frequency Sensitivity +3/-1 dB (500 kHz to 50 GHz), ±3 dB (Full Bandwidth)
Polarization ± 1.5 dB
Sensors (All E-field) Low-band surface area detector, diode / Mid-band dipole, diode / High-band thermocouple
Alarm Indicators
LEDs
Audio Alarm 1
Audio Alarm 2
Vibrator, Internal and Remote a
Five High Intensity Flashing, 2 Yellow, 3 Red
Steady Tone
Variable Tone
Continuous
Alarm Threshold b
Alarm 1, Default Setting
Range of Adjustment c
Alarm 2, Default Setting
Range of Adjustment c
Vibrator, Internal and Remote a
50% of Standard
10% to 100% of Standard in increments of 5%
200% of Standard
20% to 200% of Standard in increments of 5%
Same Threshold as Alarm 1
250% of Standard
50% to 500% of Std. in inc. of 5%
1000% of Standard
100% to 1000% of Std. in inc. of 5%
Same Threshold as Alarm 1
LED Indicators 10%, 20%, 50%, 100% and 200%
of Standard
50%, 100%, 250%, 500% and 1000%
of Standard
CW Overload 3000% of Standard or Guidance
Peak Overload 32 dB above Standard or Guidance
Memory d
Number of Data Points
Logging Interval, Default
Range c
Logging Time @ rate of 12/min
31,263
5 sec.
1-60 sec. in 1 sec. inc.
1.5-6.0 min. in 0.5 min. inc.
42.3 hrs
—
31,263
5 sec.
1-60 sec. in 1 sec. inc.
1.5-6.0 min. in 0.5 min. inc.
42.3 hrs
Maximum Hold Modes c Off, Instantaneous (1 sec. avg.), Averaged up to 6 Minutes
ELF Immunity 6,000 V/m 100,000 V/m 6,000 V/m 6,000 V/m
Battery Type / Life (approx.) 1 x AA Alkaline / 1500 hrs. with LEDs and Alarms OFF
Temperature: Operating
Non-operating
-10°C to +55°C
-20°C to +55°C
Humidity 0 to 95%, non-condensing
Weight (including battery) 157 g. / 5.5 oz.
Size 10.5 cm H x 7.6 cm W x 3.5 cm D / 4.12" H x 3.0" W x 1.37" D
Color Gray
Accessories Supplied Pocket Clip, Belt Clip, Plastic Storage Box, Battery, User’s Guide
Optional Accessories Model 8865 Interface Kit, Soft Case with Belt Clip (P/N 21847600) , Soft Case
for Climber’s Harness (P/N 21847700) and Remote Vibrator (P/N 11110100)
NOTES: a Remote vibrator, P/N 11110100, is available as an option. It operates from its own battery.
b Percent-of-Standard percentages are in terms of equivalent plane-wave power density relative to the Standard or Guidance.
c The Interface Kit is required to make adjustments to the monitor settings and/or to download logged data.