Atec Narda-A8860-A8862-A8864 - Manual (Page 4)

Personal and Area Monitors
USA TEL: (1) 631 231-1700 • FAX: (1) 631 231-1711 • E-MAIL: [email protected] • www.narda-sts.com
GERMANY TEL: 49-7121-9732-777 • FAX: 49-7121-9732-790 • E-MAIL: [email protected] • www.narda-sts.de
50 Years of
Excellence
RF Safety
Test Solutions
an communications company
narda
Safety Test Solutions
Data Reports
Monitor Settings
The User’s Software allows you to change seven parameters to tailor the Nardalert XT’s operation:
Parameter Default Options
Alarm 1 Threshold 50% of Standard a 10% to 100%
Alarm 2 Threshold 200% of Standard a 20% to 200%
10% LED a Active Inactive
20% LED a Active Inactive
Logging Rate Every five seconds b 1 second to 6 minutes
Maximum Hold Off
Highest One-Second Average;
Highest Average (10 seconds to 6 minutes) c
Time & Date Greenwich Mean Time (GMT) Local Time & Date
a Values for 8864 Series are five times higher
b Averaged over the interval
The histogram shows the distribution of data points. Configure a report to print directly or
for export to a word processor.
Turn one or two LED
Indicators off so that
low field levels are
not indicated
Change one or both
alarms to fit your
needs
Change the logging rate
to get either more data
points or a longer
logging time
The monitor can be
set to indicate the
highest peak field or
the highest average
field
The User Parameter setup screen makes it easy to set the
monitor to meet your needs