Atec Narda-EHP-50D - Manual (Page 5)

EHP-50D 04-11 5 / 12 Subject to change without notice
NBM-550 DISPLAY OPERATION
Handheld display unit for field measurements
The EHP-50D can also be easily operated through the
Broadband Field Meter NBM-550. In order not to influence the
field to be measured, communication between the EHP-50D
Analyzer and the NBM Unit is through a rugged optical fiber
cable. The NBM-550 supports the following settings and
measurement modes:
- Electric or magnetic field selection (1 kV/m; 100 kV/m;
100 µT;10 mT)
- Span selection (100 Hz to 100 kHz)
- Wideband or highest peak modes
- Spectrum mode
- Monitor mode (Actual; Max; Avg; Min)
- XYZ mode (wideband or highest peak)
Additional features include:
- Measurement setups
- Normalized spectrum in % relative to a standard (e.g.
ICNIRP)
- Alarm with adjustable thresholds for electric and
magnetic field
- Averaging (4 to 32 samples) and Maximum Hold
- Unit selector for Tesla / Gauss
- Full resolution spectrum marker
- Data storage on NBM-550 including spectrum data
Narda Broadband Field Meter NBM-550
with EHP-50 D - Timer Logging
- Post-averaging for logged data on PC (RMS, Mean,
Median)
- Powerful PC software NBM-TS for evaluation and
documentation
- GPS receiver (optional)
- Operating languages:
Chinese, English, French, German, Italian, Russian,
Spanish, Turkish
For more information please refer to the NBM-550 product information on the
Narda website.