Atec Druck-DPI515-A,B2 - Manual (Page 7)

DPI 515
Specifications
(E) Low Absolute Pressure _ Enhanced Performance
Low pressure absolute control using resonant
sensors for the following pressure ranges:
• 10 to 17 psia (750 to 1150 mbar)
• 0.5 to 20 psia (35 to 1310 mbar)
• 0.5 to 40 psia (35 to 2650 mbar)
• 0.5 to 50 psia (35 to 3500 mbar)
Precision 0.01% FS including non-linearity,
hysteresis, repeatability and temperature effects
over 50°F to 105°F (10°C to 40°C). Measuring stability
0.01% FS per year.
(G1) Filter Set _ Single Range Instrument
Set of in-line filters for the pressure supply and
outlet
(G2) Filter Set _ Dual Range Instrument
Set of in-line filters, one for each pressure supply
and outlet
(H) Sensor Calibration Module
Input card supplies 10 V regulated or 24 V
unregulated sensor excitation. Reads in mV, mA or
volt output from the pressure sensor under test.
Please refer to the DPI 515 SCM datasheet for full
specification and order details
(J) Venturi Vacuum Generator
Ideal for generation of low vacuum supply from
positive pressure source, not suitable for bottle
supplies. Generates -0.3 to 5.4 psi (-20 to -370 mbar)
vacuum for 15 to 150 psi (1 to 7 bar) supply
respectively.
Accessories
The DPI 515 is supplied with power lead and molded
plug, user handbook and calibration certificate traceable
to international standards, NIST and NPL. Units of 30 psi
(2 bar) and below come with atmospheric filter kit.
Related Products
Laboratory and Workshop Instruments
GE manufactures a comprehensive range of pressure
instruments. Included in this range are pressurements
industrial deadweight testers and Ruska high precision
controllers and primary standard piston gauges.
Portable Field Calibrators
GE manufactures a wide range of portable pressure,
temperature and electrical field calibrators particularly
suitable for use in remote outdoor conditions.
Calibration Management Software
GE Intecal-W is a Windows
® -based package that
supports laboratory and field based calibrations.
Interfacing with many popular instruments such as the
DPI 515, DPI 605, DPI 610 and MCX, Intecal-W offers a
complete and quality assured solution to calibration
management.
Pressure Transducers and Transmitters
GE manufactures an extensive range of pressure
transducers and transmitters, including custom
designed, rangeable and Smart/HART
® process pressure
transmitters.
Ordering Information
Please state the following (where applicable):
(1) DPI 515
(2) Single or dual range
(3) Pressure range(s), gauge or absolute
(4) Options required
(5) User language
(6) Supporting Services (order as separate items)
LabVIEW ® Driver
Software driver for LabVIEW is available free of charge
and can be downloaded at www.dpi515.com
GE
Sensing