Atec Druck-DPI515-A,B2 - Manual (Page 6)

DPI 515
Specifications
Dual Range
A single unit may have a combination of any two
pressure ranges regardless of the ratio between them.
Electrical
Communications
RS232 and IEEE-488.2 HS interfaces supplied as
standard. SCPI protocol and DPI 500, DPI 510, DPI 520
and Ruska Series 7000 emulation
Control Inputs and Outputs
• 1 opto-isolated input for switch test or event trigger
• 2 relay outputs
• 24 VDC output to energize external devices via logic
outputs
Power Supply
• 90 to 260 VAC, 50 to 60 Hz
• Power rating 60 VA
Environmental
Temperature
Operating: 40°F to 125°F (5°C to 50°C)
Calibrated: 73°F (23°C)
Storage: -5°F to 140°F (-20°C to 60°C)
Humidity
Compliant with Def. Stan. 66-31 8.6 Cat 3
Vibration
Compliant with Def. Stan. 66-31 8.6 Cat 3
Shock
Mechanical shock conforms to EN61010
Conformity
EN61010, EN61326-1, 97/23/EC CE marked
Physical
Weight
Approximately 20 lb (9 kg)
Dimensions
15.35 in x 2.5 in x 11.8 in (390 mm x 132 mm x 300 mm).
3 U high case
Installation
Retractable feet supplied for benchtop use, alternatively
an optional rack mounting kit allows easy installation
within a 19 in (483 mm) rack system
Pneumatic Connections
1/8 BSP female or 1/8 NPT female via adapter supplied
on vent, supply and outlet connections (USA only)
Reference connection M5 female
Options
(A) Barometric Reference
10 to 17 psi (750 to 1150 mbar) absolute
measurement range with resolution to 0.0001 psi
(0.01 mbar). This enables the DPI 515 to switch
between gauge and absolute operating modes, and
to provide a barometric pressure reading on
demand. Option (B1) or (B2) included.
(B1) Negative Calibration _ Single Range
Calibration of a single gauge range to -13 psi (-1 bar)
or the full scale value, whichever is less. Available on
ranges up to 1000 psig (70 bar)
(B2) Negative Calibration _ Dual Range
Calibration of both gauge ranges to -13 psi (-1 bar)
or the full scale value, whichever is less. Available on
ranges up to 1000 psig (70 bar)
(C) Aeronautical Units
Additional display units provided for airspeed,
altitude and rate of climb: km/hr, mph, mach, ft, m,
ft/min, m/min
(D) Rack Mounting Kit
Includes side and rear supporting brackets for 19 in
(483 mm) rack systems
GE
Sensing