Atec Agilent-E4411B-03B-08B - Manual (Page 12)

12
Audible noise (ISO 7779)
Sound pressure at 25 °C
<40 dBa, (<5.3 Bels power)
Power requirements
ac Voltage
90 to 132 Vrms, 195 to 250 Vrms
Frequency 47 to 440 Hz, 47 to 66 Hz
Power consumption, on <300 W
Power consumption, standby <5 W
dc Voltage 12 to 20 Vdc
Power consumption <200 W
Weight (without options)
E4411B
13.2 kg (29.1 lb), characteristic
E4403B 15.5 kg (34.2 lb), characteristic
E4408B 17.1 kg (37.7 lb), characteristic
Dimensions
Height
222 mm (8.75 in)
Width 373 mm (14.7 in) without handle
408 mm (16.1 in) with handle
Depth 409 mm (16.1 in) without handle
516 mm (20.3 in) with handle
Data storage
Internal
200 traces or states, nominal
Inputs/outputs
Amplitude reference 1
Internal
E4411B –25 dBm, nominal
E4411B, Option 1DP +28.75 dBmV, nominal
External, BNC (f)
E4403B, E4408B –20 dBm, nominal
Front panel connectors
Input
Type N (f), 50 Ω nominal
Option 1DP ( E4411B) BNC (f), 75 Ω nominal
Option BAB ( E4408B) APC 3.5 (m)
RF Out
Option 1DN Type N (f), 50 Ω nominal
Option 1DQ ( E4411B) BNC (f), 75 Ω nominal
Probe power, voltage/current +15 Vdc, –12.6 Vdc at 150 mA maximum
Speaker Front-panel knob controls volume
Headphone 3.5 mm (1/8 in) miniature audio jack
External keyboard 6-pin mini-din
Rear panel connectors
10 MHz ref output
BNC (f), 50 Ω, >0 dBm, characteristic
10 MHz ref input BNC (f), 50 Ω, –15 to +10 dBm,
characteristic
External trigger input BNC (f), (5V TTL)
VGA output VGA compatible, 15-pin mini D-SUB,
640 x 480 resolution
IF sweep and video ports (Option A4J)
Aux IF output
BNC (f), 21.4 MHz, nominal –10 to
–70 dBm (uncorrected), characteristic
Aux video out BNC (f), 0 to 1 V (uncorrected),
characteristic
Hi swp in BNC (f), (5 V TTL)
Hi swp out BNC (f), (5 V TTL)
Swp out BNC (f), 0 to +10 V ramp, characteristic
GPIB interface
Option A4H
IEEE-488 bus connector
Serial interface
Option 1AX
9-pin D-SUB (m), RS-232
Parallel printer interface
Option A4H or 1AX
25-pin D-SUB (f), printer port only
Tracking generator
(Option 1DN and Option 1DQ)
Output frequency range
E4411B 50
Ω (Opt. 1DN) 9 kHz to 1.5 GHz
E4411B 75 Ω (Opt. 1DQ) 1 MHz to 1.5 GHz
E4403B, E4408B (Opt. 1DN) 9 kHz to 3.0 GHz
Output power level 2
Range
E4411B 50
Ω 0 to –70 dBm (20 °C to 30 °C)
E4411B 75 Ω +42.75 to –27.25 dBmV
E4403B, E4408B 50 Ω –2 to –66 dBm
Vermier
E4411B
Range 10 dB
Output attenuator range 0 to 60 dB, 10 dB steps
E4403B, E4408B
Range 9 dB
Output attenuator range 0 to 56 dB, 8 dB steps
Output power sweep 2
Range
E4411B 50 Ω –15 dBm to 0 dBm –
(source attenuator setting)
E4411B 75 Ω +27.76 dBmV to +42.76 dBmV –
(source attenuator setting)
E4403B, E4408B 50 Ω –10 dBm to –1 dBm –
(source attenuator setting)
Output flatness
E4411B 50
Ω (referenced to 50 MHz, 0 dB attenuation)
10 MHz to 1.5 GHz ±1.5 dB
E4411B 75 Ω (referenced to 50 MHz, 0 dB attenuation)
10 MHz to 1.5 GHz ±2 dB
E4403B, E4408B 50 Ω (referenced to 50 MHz, –20 dB signal level)
10 MHz to 3.0 GHz ±2 dB
Spurious output
Harmonic spurs
E4411B, 50
Ω (0 dBm output), 75 Ω (+42.8 dBmV output)
20 MHz to 1.5 GHz <–25 dBc
E4403B, E4408B 50 Ω (–1 dBm output)
9 MHz to 3 GHz <–25 dBc
Dynamic range Maximum output power level–
displayed average noise level
Output tracking
E4411B
Drift No error
Swept tracking error No error for coupled sweep times
E4403B, E4408B
Drift 1.5 kHz/5 minutes, characteristic
Swept tracking error Usable in 1 kHz RBW after 5 minutes
of warm up
Output VSWR
E4411B
<2.5:1, characteristic
E4403B, E4408B
0 dB attenuation <2.0:1, characteristic
>8 dB attenuation <1.5:1, characteristic
Specifications, continued
1 Amplitude reference actual power might differ from the nominal value. Actual calibration power is stored internally.
2 E4411B: 20 °C to 30 °C.