Atec Agilent-E4421B-24B-32B-33B-35B-36B - Manual (Page 27)

27
For frame length = 80
1.2, 2.4, 4.8, 9.6,19.2
2 , 38.4 2 ,76.8 2 ,kbps
for RC 3
1.8, 3.6, 7.22, 14.42, 28.82, 57.62 kbps
for RC4
Frame offset (0 to frame length/1.25) -1
R-CCCH 3 (Reverse Common Control Channel) and R-EACH 3
(Reverse-Enhanced Access Channel)
Walsh code 0 to 7
Data PN9, PN15, fixed 4 bit pattern, user file
Frame length 5, 10 or 20 mSec
Data rate For frame length = 5
38.4 kbps
For frame length = 10
19.2, 38.4 kbps
For frame length = 20
9.6, 19.2, 38.4 kbps
Real-time EDGE personality
(Option 202, ESG-DP and ESG-D series only)
Description
Option 202 is a firmware personality built upon the internal
real-time I/Q baseband generator (Option UN8). This option will
simulate both uplink and downlink EDGE signals. Data can be gen-
erated internally or externally with continuous data, or bursted and
framed signals. Use custom filtering and framing to keep pace
with the evolving definition of EDGE.
Modulation 3 π/8-rotating 8PSK (per EDGE
specifications) user-selectable (see
Modulation under Option UN8)
Filter “Linearized” Gaussian (per EDGE
specifications) user-selectable (see
Filter under Option UN8)
Symbol rate
User-adjustable (see Symbol rate under
Option UN8) 270.833 kHz (default)
Burst Shape Defaults to EDGE standard power vs.
time mask with user definable rise and
fall time. Alternatively, upload externally
defined burst shape waveforms.
Data structure Time slots may be configured as normal
or custom. The data field of a time slot
can accept a user file, PRBS (PN9 or
PN15), a fixed sequence or external
data. All other fields in a timeslot are
editable.
EVM performance (typical) 1
Output power Output frequency
Standard Option UNB 800 MHz 1900 MHz
≤7 dBm ≤10 dBm < 0.75% < 1.75%
≤4 dBm ≤7 dBm < 0.75% < 1.00%
Alternate time slot power
level control
(Option UNA, ESG-DP and ESG-D series only)
Amplitude is settled within 0.5 dB in 20 µsecs, +4 to –136 dBm
at 23 ± 5 °C
Improved ACP performance for
TETRA, CDMA and W-CDMA
(Option H99, ESG-D and ESG-DP series only)
ACP improvements for TETRA, CDMA and W-CDMA are listed in
the appropriate heading under Options 100, 101, UN8, UN5, and
H98 respectively. Specifications that are changes from the
standard are listed below
1 .
Output power
250 kHz to 3 GHz + 10 dBm to –136 dBm
>3 GHz + 4 dBm to –136 dBm
Coherent
carrier out
–4 dBm ± 5 dBm, typical
Level accuracy Specifications degrade by 0.2 dB
Level accuracy with digital modulation
≤3 GHz specifications apply at ≤+7 dBm output power
>3 GHz specifications apply at
≤+4 dBm output power
DC vector accuracy
>3.7 GHz specifications apply down to >3 GHz
>3 GHz specifications apply at
≤4 dBm
Attenuator hold level range is same as Option UNB
Spectral purity
nonharmonics > 3 GHz specifications apply at
≤+4 dBm output power
Amplitude
modulation
500 kHz to 3 GHz specification is
typical
>3 GHz not specified
Pulse modulation
On/off ratio
<250 MHz
>60 dB
Pulse modulation
Level accuracy < ± 0.7 dB (relative to CW) 2 , typical
1. All specifications apply at 23 ± 5 °C.
2. With ALC OFF, specifications apply after the execution of power search.
With ALC ON, specifications apply for pulse repetition rates ≤ 10 kHz
and pulse widths ≥ 5 µs.