beautypg.com

Spectral purity, Frequency switching time – Atec Anritsu-MG3690 Series User Manual

Page 4

background image

4

Spectral Purity

All specifications apply at the lesser of +10 dBm output or maximum specified leveled
output power, unless otherwise noted.

Spurious Signals

Frequency Switching Time

Definitions

Free Running Mode:
(Step or List Sweep)

t

sw

= Switching Time, Unlocked

t

lk

= Locked Time = 1ms + t

dw

t

dw

= Dwell Time, after locking. Selectable, 1 ms minimum

t

lk

(min) = 2 ms

Single Frequency Trigger Mode:
(List, non-sequential, and CFx modes)

Switching Time (t

sw

)

Power Line and Fan Rotation Spurious Emissions (dBc):

Non-harmonics:

AM Noise Floor:
Typically < –145 dBm/Hz at 0 dBm output and offsets > 5 MHz from carrier.

Residual FM* (Analog Sweep and Unlocked FM modes, 50 Hz - 15 kHz BW) (typical):

* –30 dBc typical with high power Option 15
** 20 GHz to 21 GHz and 39 GHz to 40 GHz, –20 dBc typical (Option 15 only)

Harmonic and Harmonically-related:

t

sw

* (ms)

Condition

5 ms + 1 ms/GHz

step not starting at, or crossing dwell frequencies

7 ms + 1 ms/GHz (typical)

step not starting at, or crossing band switching frequencies

8 ms + 1 ms/GHz (typical)

step starting at, or crossing band switching frequencies

Frequency Range

Standard

0.1 Hz to 10 MHz (Option 22)

< –30 dBc

10 MHz to ≤ 100 MHz (Option 4)

< –40 dBc

> 100 MHz to ≤ 2.2 GHz (Option 4)

< –50 dBc

10 MHz to ≤ 50 MHz (Option 5)

< –30 dBc

> 50 MHz to < 2 GHz (Option 5)

< –40 dBc

2 GHz (> 2.2 GHz w/Option 4) to ≤ 20 GHz

< –60 dBc*

> 20 GHz to ≤ 40 GHz

< –40 dBc* **

> 40 GHz to ≤ 50 GHz (MG3695C)

< –40 dBc*

> 40 GHz to ≤ 67 GHz (MG3697C)

< –25 dBc

Frequency Range

Standard

0.1 Hz to 10 MHz (Option 22)

< –30 dBc

10 MHz to ≤ 2.2 GHz (Option 4)

< –60 dBc

10 MHz to ≤ 2 GHz (Option 5)

< –40 dBc

> 2 GHz (2.2 GHz w/Option 4) to ≤ 67 GHz

< –60 dBc

Frequency

300 Hz

Offset from Carrier

300 Hz to 1 kHz

> 1 kHz

10 MHz to ≤ 500 MHz (Option 4)

< –68

< –72

< –72

> 500 MHz to ≤ 1050 MHz (Option 4)

< –62

< –72

< –72

> 1050 MHz to ≤ 2200 MHz (Option 4)

< –56

< –66

< –66

0.01 GHz to ≤ 8.4 GHz

< –50

< –60

< –60

> 8.4 GHz to ≤ 20 GHz

< –46

< –56

< –60

> 20 GHz to ≤ 40 GHz

< –40

< –50

< –54

> 40 GHz to ≤ 67 GHz

< –34

< –44

< –48

Frequency Range

Resid ual FM (Hz RMS)

Option 3/3X

Standard

≤ 8.4 GHz

< 40

< 120

> 8.4 GHz to 20 GHz

< 40

< 220

> 20 GHz to ≤ 40 GHz

< 80

< 440

> 40 GHz to ≤ 67 GHz

< 160

< 880

Frequency Range

Resid ual FM (kHz RMS)

Unlocked Narrow

FM mode

Unlocked Wide

FM mode or

Analog Sweep (typ.)

0.01 GHz to ≤ 20 GHz

< 10

< 25

> 20 GHz to ≤ 40 GHz

< 20

< 50

> 40 GHz to ≤ 67 GHz

< 40

< 100

Band Switching Dwell Frequencies:

2 (2.2 w/Opt. 4), 10, 20, 40 GHz

Filter Switching Dwell Frequencies:

3.3, 5.5, 8.4, 13.25, 25, 32 GHz

< 2.2 GHz w/Opt. 4:

12.5, 15.625, 22.5, 31.25, 43.75, 62.5, 87.5,
125, 175, 250, 350, 500, 700, 1050, 1500 MHz

*Not applicable with FM mode active

*Residual FM is not applicable with FM locked mode

Residual FM* (CW and Step Sweep modes, 50 Hz - 15 kHz BW) (typical):