Atec Agilent-33600A Series - Manual (Page 20)

20
Connector Rear-panel BNC, shell and pin isolated from chassis (±42 V maximum)
assignment Channel 1, Channel 2, or both
Voltage level (nom) ±1 V or ±5 V full scale, selectable
Input Impedance (nom) 5 kΩ
Bandwidth (−3 dB) (typ) 0 hz to 100 kh
General characteristics
Connector Rear-panel BNC, chassis-referenced (functions as Input or Output)
assignment: Input Channel 1, Channel 2, or both
Output Channel 1 or Channel 2
Polarity Positive or Negative slope
Maximum Rate 1 Mhz
Input characteristics
threshold voltage (nom) (Output Level setting)/2
Impedance (nom) 10 kΩ, DC-coupled
Minimum pulse width 100 ns
Variable trigger Delay 0 to 1000 s, 1-ns resolution
Latency (typ) 15 < 140 ns
Jitter (typ) < 320 ps, rms
Output characteristics
Output voltage (nom)
Low level 0 V
high level 0.9 V to 3.8 V into high impedance, 0.1-V resolution
Impedance (nom) 50 Ω
Duty cycle (nom) 50%
Fan-out Up to four agilent 33600a Series waveform generators
Input characteristics
Connector Rear-panel BNC, shell and pin isolated from chassis and all other connectors (±42 V max.)
Frequency range: Standard 10 Mhz ± 20 hz
Option OCX 10 Mhz ± 1 hz
Voltage 200 mVpp to 5 Vpp
Impedance 1 kΩ ll 20 pF, aC-coupled
Lock time (typ) < 2 s
Output characteristics
Connector Rear-panel BNC, chassis-referenced
Frequency (nom) 10 Mhz
Level (nom) 0 dBm (632 mVpp) into 50 Ω
Impedance (nom) 50 Ω
Speciications
R E V O L U T I O N A R Y S I G N A L F I D E L I T Y W I T H U N M A T C H E D C A P A B I L I T I E S
Modulation input
External trigger/gate input/output
External frequency reference input/output
Footnotes referenced on page 22