Atec California_Instruments_Compact_i-iX Series - Manual

858.458.0223 [email protected]
The Compact iX Series represents a new
generation of AC/DC power sources that address
the increasing demands on test equipment to
perform additional functions at a lower cost.
By combining a flexible AC/DC power source
with a high performance power analyzer, the
Compact iX Series is capable of handling complex
applications that have traditionally required
multiple systems.
The sleek integrated approach of the Compact
iX Series avoids cable clutter that is commonly
found in test systems. All connections are made
internally and the need for digital multimeters,
power harmonics analyzers, and current shunts or
clamps is eliminated.
Since many components in the Compact iX Series
are shared between the AC/DC source and the
power analyzer, the total cost of the integrated
system is less than the typical cost of a multiple
unit system.
For less demanding applications, the Compact
i Series provides similar output and transient
capabilities as the Compact iX Series, as well as
basic power measurements.
Easy To Use Local Controls
Both the Compact i and iX Series are
microprocessor controlled and can be operated
from an easy to use front panel keypad. Functions
are grouped logically and are directly accessible
from the keypad. This eliminates the need to
search through various levels of menus and/or
soft keys. A large analog control knob can be
used to quickly slew output parameters. This knob
is controlled by a dynamic rate change algorithm
that combines the benefits of precise control
over small parameter changes with quick sweeps
through the entire range.
Applications
With precise output regulation and accuracy,
the compact i/iX series AC and DC sources
address many application areas for AC and DC
power testing. The i/iX also provides a high
load current capability, multi or single phase
output modes, and built-in power analyzer
measurements. Additional features including line
distortion simulation (LDS) and arbitrary waveform
generation address requirements for product
quality and regulatory compliance testing.
Product Evaluation and Test
Increasingly, manufacturers of electronic
equipment and appliances are required to fully
evaluate and test their products over a wide
range of input line conditions. The built-in output
transient generation and readback measurement
capability offers the convenience of an easy to use
and integrated test system.
Avionics
With an output frequency range to 1000 Hz,
at up to 150 VRMS, the Compact i/iX Series is
well suited for aerospace applications. Precise
frequency control and accurate load regulation
are key requirements in these applications. The
standard USB (or optional GPIB / LAN) control
interface and SCPI command language provide for
easy integration into existing ATE systems. Since
the Compact i/iX Series can eliminate the need
for several additional pieces of test equipment
and only occupies 3.5 inches of rack space (2U),
saving both cost and space. Instrument drivers
for popular programming environments such as
National Instruments LabView, DO-160, ABD-
0100, MIL-STD-704A-F, A350, AIRB, AMD and
Boeing B787 are available to speed up system
integration.
California Instruments Compact i/iX Series 750–2250 VA
• 750 VA to 2250 VA of AC Output Power
• Combines AC/DC source and power analyzer
• Harmonic analysis of Voltage and Current
• AC, DC and AC+DC Output Modes
• Multiple Chassis Configurations
• Powerful output transient generation
• High Crest Factor Capability
• Arbitrary & harmonic waveform generation
• Single and Three Phase models available
Precision Programmable AC Source 150–300 V
10–40 A
115 208 230
159
AMETEK
Programmable Power
9250 Brown Deer Road
San Diego, CA 92121-2267
USA
04218011