Atec Agilent-6680 Series - Manual (Page 2)

64
Application Notes:
6671A/72A/81A/82A/90A
System DC Power Supplies Product Overview
5988-3050EN
Agilent DC Power Supplies
for Base Station Testing
5988-2386EN
10 Practical Tips You Need to
Know About Your Power Products
5965-8239E
Supplemental Characteristics
for all model numbers
DC Floating Voltage: Output terminals can
be floated up to ±60 Vdc maximum from
chassis ground
Remote Sensing: Up to half the rated
output voltage can be dropped in each
load lead. The drop in the load leads
subtracts from the voltage available for
the load.
Command Processing Time: Average time
required for the output voltage to begin
to change following receipt of digital data
is 20 ms for power supplies connected
directly to the GPIB
Modulation: (analog programming of
output voltage and current):
Input Signal: 0 to –5 V for voltage,
0 to +5 V for current
Input Impedance: 30 k Ω /or greater
AC Input (47 to 63 Hz): 180 to 235 Vac
(line-to-line, 3 phase), 27.7 A rms
maximum worst case, 21.4 A rms
nominal; 360 to 440 Vac, 14.3 A rms
maximum worst case, 10.7 A rms nomi-
nal (maximum line current includes
5% unbalanced phase voltage condition.)
Output voltage derated 5% at 50 Hz
and below 200 Vac.
Input Power: 7350 VA and 6000 W
maximum; 160 W at no load
GPIB Interface Capabilities: SH1, AH1, T6,
L4, SR1, RL1, PP0, DC1, DT1, E1, and C0.
IEEE-488.2 and SCPI command set.
Software Driver:
•IVI-COM
•VXIPlug&Play
Size: 425.5 mm W x 221.5 mm H x
674.7 mm D (16.75 in x 8.75 in x 25.56 in)
Weight: Net, 51.3 kg (113 lbs);
shipping, 63.6 kg (140 lbs)
Warranty Period: One year
Ordering Information
Opt 208 180 to 235 Vac, 3 phase,
47 to 63 Hz
Opt 400 360 to 440 Vac, 3 phase,
47 to 63 Hz
Opt 602 Two Bus Bar Spacers for
paralleling power supplies
(p/n 5060-3514)
* Opt 908 Rack-mount Kit
(p/n 5062-3977 and p/n 5062-3974)
Single-Output: 5000 W GPIB
(Continued)
More detailed specifications at www.agilent.com/find/6680
High Performance DC Power Supplies speed and accuracy for test optimization
* Opt 909 Rack-mount Kit with Handles
(p/n 5063-9221 and p/n 5063-9219).
Opt 0L1 Full documentation on
CD-ROM, and printed standard
documentation package
Opt 0L2 Extra copy of standard
printed documentation package
Opt 0B0 Full documentation on
CD-ROM only
Opt 0B3 Service Manual
* Support rails required
Accessories
p/n 5060-3513 Three 30-A Replacement
Fuses for 180 to 235 Vac line
p/n 5060-3512 Three 16-A Replacement
Fuses for 360 to 440 Vac line
E3663AC Support rails for Agilent
rack cabinets
p/n 5080-2148 Serial link cable 2m (6.6 ft.)
Side
Output
Buss Bars
Top
12.7mm
0.5"
28.6mm
1.13"
30.2mm
1.19"
65.1mm
2.56"
27.8mm
1.09"
9.5mm
0.38" 12.7mm
0.5"
674.7mm
26.56"
667.3mm
26.27"
574mm
22.6"
221.5mm
8.75"
425.5mm
16.75"
Buss Bar Detail
+
–
Rear
3/8" Diameter (6)
3 3/4"
Agilent Models: 6680A, 6681A, 6682A, 6683A, 6684A