Atec CA-8332-8334 - Manual (Page 2)

Principal parameters measured:
●
TRMS AC+DC voltage: single voltage
up to 480 V ; phase-phase voltage up to 600 V.
●
TRMS AC, AC+DC current up to 3000 A
(according to sensors used).
●
Peak voltage and current.
●
Frequency from 40 to 70 Hz.
●
Active, reactive and apparent power per phase
and their aggregate.
●
Active, reactive, consumed and produced energy.
●
Harmonics for voltage, current, or power up
to the 50 th order.
Principal values computed:
●
Neutral current.
●
Crest factors for current and voltage.
●
K factors for current (transformer application).
●
Power factor, displacement factor and tangent.
●
Short-term voltage flicker.
●
Voltage and current unbalance.
●
Total harmonic distortion.
●
Average, min and max values
of any computed value.
Regardless of the screen, the synergy
between the display and the keyboard
is very efficient.
Additional functions:
●
Graphic data processing.
●
Alarms, transients.
●
Recording, dating and characteristics of
disturbances (swells, dips and interruptions, etc.)
●
Data storage.
●
Immediate screen printout to printer.
●
Screen storage.
●
Optical link communication.
Designed for Electrical Energy departments and Maintenance
services in industrial and administrative buildings, the Qualistar
C.A 8332 and C.A 8334 give an instantaneous image of the main
characteristics of the quality of your electrical network.
These instruments also provide numerous calculated values
and processing functions in compliance with standards in use
(EN 50160, IEC 61000-4-15, IEC 61000-4-30, IEC 61000-4-7).
Display mode
Horizontal cursor
Vertical cursor
for selecting phases
Date and Hour
Battery status
Pop-up menu functions;
the active function stays yellow.
P R E S E N T AT I O N