Atec Espec-SH Series - Manual (Page 15)

１４
Computer interface
・GPIB
・RS-232C
・E-BUS
*Select one other than standard RS-485.
Communication functions
・RS-485 5, 10m
・GPIB 2, 4m
・RS-232C 1.5, 3, 5m
1.5, 3, 5m for extension
・E-BUS 5, 10m
Communication cable
Cable port
Additional cable ports are provided on
the wall of chamber.
・25, 50, 100mm diameter
・Flat cable port
*One silicon sponge rubber port plug is equipped
per one cable port.
* Basic specification of the chamber may not be
effective when equipped with a cable port.
Cable port rubber plug
The additional silicon sponge rubber
port plug .
This stand enhances mobility of the
chamber and ease the work to load/
unload the specimen. Stand for stack-
ing two or three chambers save
installation space.
* Be sure to secure the stand onto the floor with
earthquake resistant fittings for your safety
especially when using stand for two/ three
chambers.
OPTIONS
Stand Auxiliary water tank circuit (for SH)
Automatic water supply circuit is
equipped to replenish the standard tank
from the auxiliary water tank.
・Supply water quality
pure water
(electrical conductivity 0.1~10μS/cm)
・Water supply pressure
4.9~19.6KPa (Gauge)
Auxiliary water tank (for SH)
Auxiliary tanks are provided to
replenish water to the standard tank.
Tray for auxiliary water tank (for SH)
Protects water from leaking while
supplying water from the auxiliary
water tank.
Drain tank (for SH)
Storage tank for drain water with a full
indication buzzer.
Shelf
Auxiliary shelves on request.
SH/ SU-221･241･261
・Effective size 200W×150Dmm
・Load capacity
(uniformly distributed load) 500g
SH/ SU-641･661
・Effective size 300W×300Dmm
・Load capacity
(uniformly distributed load) 5kg
Specimen basket
・Size 206W×40H×156D mm
・Material 18-8 Cr-Ni stainless steel,
5 mesh metal basket
25mm diameter type
flat type
50, 100mm diameter type
for one chamber
for stacking
two chambers
*Stand for three chambers is designated only for
SH-221, 241, SU-221, 241.
for stacking
three chambers