Atec Espec-SH Series - Manual (Page 11)

Operation mode Program operation, Constant operation
7-segment LED display
Mechanical key input
9 steps/ 1 pattern (1 to 99 repetitions)
Thermocouple type T (Copper/ Copper-Nickel)
PID control
RS-485
Lithium battery, 1
Temp :−25 to ＋155℃ (SH-221, SU-221)
:−45 to ＋155℃ (SH-241･641,SU-241･641)
:−65 to ＋155℃ (SH-261･661,SU-261･661)
Humid : 0 to 100 %rh (SH only)
Tim : 0 to 99 hours 59 minutes,
100 to 999 hours
Temp : 0.1℃
Humid : 1%rh (SH only)
Time : 1 minute
(in one hour unit for over 100 hours)
Input burn-out detection function
Upper and lower temperature (& humidity) limit alarm function
Self-diagnostic function (watchdog timer)
Alarm indication function
Power failure protection function
Timer function (automatic start/stop)
Refrigerator capacity automatic control function
Temp : 0.5℃ (Typ.)
Humid : ±2%rh (Typ.) (SH only)
Time : within 30 sec. per month
Display
Setting
Program capacity
Setting and
indication
ranges
Setting and
indication
resolution
Indication
accuracy *
Input
Control
Communication function
Battery
Auxiliary
functions
Model ES-102
* At +23℃ ±5℃ ambient temperature
１０
TEMPERATURE & HUMIDITY CONTROL RANGE (SH type only) TEMPERATURE (& HUMIDITY) PROGRAM INDICATOR CONTROLLER
S□ - □ □1
Temperature range 2: −20 to ＋150℃
4: −40 to ＋150℃
6: −60 to ＋150℃
Capacity 2: 22.5L
6: 64.0L
H: Low temperature & humidity chamber
U: Low temperature chamber
100
90
80
70
60
50
40
30
20
10
0
10 20 30 40 50 60 70 80 90 100
85℃ 15℃ Temperature ℃
95%rh
Relative
Humidity
%rh
※ At ＋23℃ anbuebt temperature.
MODEL