Atec EM-Test-UCS200M - Manual (Page 4)

EM TEST AG Tel: +41 (0)61 717 91 91
Sternenhofstr. 15 Fax: +41 (0)61 717 91 99 ucs200m_eV115.doc
CH-4153 Reinach email: [email protected] 09.08.07
Switzerland URL http://www.emtest.com Page 4/4
Micropulse module,
Pulses based on SAE J1455
SAE J1455
Mutual Pulse as per SAE J1455
Rise time tr (10% - 90%) 1µs +20%
Pulse duration td at τ 15µs ± 20%
Internal resistor 50 Ω ± 10%
Inductive Pulse as per SAE J 1455
Rise time tr (10 - 90%) 1µs ± 20%
Pulse duration td at τ 1,000µs ± 20%
Internal resistor 20 Ω ± 10%
Options
CA ISO Micropulse/Load Dump pulse verification kit
The SmartRack
Sophisticated Housing for Sophisticated Instruments
General data
General data
Dimensions, weight
For models 50A
19“ / 3HU, approx. 20kg
For models 100A 19“ / 6HU, approx. 30kg
For models 150A and 200A 19“ / 9HU, approx. 35kg
Supply voltage 115/230V +10/-15%
Fuses 2 x T 2AT (230V) or 2 x T 4AT (115V)
Options
Rack For system integration; includes GPIB
bus, pulse bus, ground reference plane,
security switch and power contact.
ISMISO Software to control the test, including
standard library, test report facility and
data conversion generator.
UCS 200M 200A model
The best place to put your generators is in the SmartRack. A wired, "intel-
ligent" rack, the SmartRack not only holds, but also interconnects and
controls equipment. Slide your generators into the SmartRack and you
can run entire test routines from your PC with no plugging or unplugging,
no stops or starts.
Select from a comprehensive directory of the most recent pre-
programmed international and manufacturer standards – including custom
pulse waveforms – and the SmartRack does the rest. You can modify test
parameters and even create your own tests.
Just how easy is testing with the SmartRack? Consider this:
• The Device Under Test (DUT) voltage has one easy connection at the
UCS 200M coupling unit
• No need to keep plugging and unplugging DUTs
• The test rack has a ground reference plane that matches with the test
table specified in ISO 7637-2:2004
• ISM ISO (SmartRack) software controls the entire test process.
It generates test reports as well
• Tests can be initiated from front panels as well as from a PC
Technical data subject to change without notice.