Atec EM-Test-UCS200N User Manual

Page 2

KARTA KATALOGOWA > UCS 200N-series > 20120209

PARAMETRY TECHNICZNE

BENEFITS

SMARTEST SOLUTION FOR AUTOMOTIVE TRANSIENT
TESTING

Never before an Ultra-Compact Simulator for automotive
transient testing like the UCS 200N series was available.
All international standards and most car manufacturer
requirements have been put into one box. All pulses are
fully compliant to the specifications. Even more, the
waveform parameters for micropulses can be varied in
order to test with pulses beyond any standard
specification.
The UCS 200N series is the heart of the redesigned EM
TEST Automotive test set-up having the ability to control
any external EM TEST Load Dump and Battery Supply
simulator. The built-in coupling network for nominal DC
currents of up to 200A forms the single-port DUT
connection for fully automated tests.
The software iso.control with its extensive standards
library put this test equipment to the top with almost
unlimited test capabilities.

OPERATION

EASY TO OPERATE

Front panel menu and function keys enable the user to
program his test routines quickly and accurately. The
cursor allows fast control of all test parameters of the
programmed routine, thus test procedures are simplified
and confidence is generated that every step is carried out
correctly.

SOFTWARE

ISO.CONTROL SOFTWARE FOR CONTROL AND
DOCUMENTATION

Outstanding user convenience, clearly structured
windows and operation features and the EM TEST
standards library along with the flexibility to generate
user specific test sequences very easily are the main
features of iso.control software. The software is
automatically configured according to the connected EM
TEST generators. iso.control software covers
international/national standards and most of the
manufacturer standards and is continuously updated.
Extensive reporting capabilities help the user to create
test reports that meet international requirements.
iso.control is supported by Windows 2000, Windows XP,
Windows Vista and Windows 7. Remote control is
achieved either via USB or GPIB. iso.control supports a
wide range of GPIB cards of National Instruments.

ACCESSORIES

ACC - CAPACITIVE COUPLING CLAMP

All lines other than supply lines are subjected to electrical
fast transient pulses by means of the ACC complying to
ISO 7637-3:2007

CA EFT KIT - VERIFICATION KIT FOR EFT/BURST PULSES

As per ISO 7637-2:2011 the characteristic of the burst
generator needs to be verified with two different loads 50
ohm and 1,000 ohm. EM TEST offers a calibration kit
consisting of the two loads and an adapter to verify the
pulses.

CA ISO - LOAD RESISTORS FOR PULSE VERIFICATION

A set of highly-accurate load resistors is unified in a
single box for the verification of micropulses and Load
Dump pulses as specified in ISO 7637-2:2011, Annex C
and a wide range of manufacturer specifications.