Atec AFJ Instruments_R3000-3030 - Manual (Page 5)

SWEEP MODE
Fast overview measurements with
logarithmic or linear frequency scale
with tuning in user defined frequency
step with selectable measuring time.
R3000 Receiver
SMART SWEEP
First measurement with one detector
(usually Peak) and after peak searching the
final measurement is repeated in these
peaks with up to five detectors. Each peak
can be check up to 10 points before / after,
setting a Limit and a Measuring Time for
each selected detector.
T RACKING GENERATOR
CW Generator has to be activated by
checking flag RF ON and then choosing the
Tracking Mode (in this case a sweep is
activated) or Single Frequency Mode.