Atec All-Test-IV-Pro - Manual (Page 6)

ALL-TEST Pro, LLC
P.O Box 1139
Old Saybrook, CT 06475
Tel 860-399-4222
Fax 860-399-3180
Email [email protected]
Web www.alltestpro.com
Represented by:
Each ALL-TEST IV PRO includes:
Case, Charger, Test Leads,
PC Interface Cable, and TREND ™ software.
Optional Accessories
• ATF11 Armature Text Fixture: for bar-to-bar testing of DC motor armatures in disassembled motors.
• M2000 Training Motor: A 1/3 HP 3-phase motor with known switch-selectable faults.
• EMCAT PRO Software: Comprehensive software for diagnostics and trending of AC motors, DC
Motors, single phase motors, and transformers.
ATPRO-115E or - 230E The ALL-TEST PRO
®
Professional System
Our most comprehensive package for off-line diagnostics and predictive maintenance. It
combines the basic troubleshooting and real-time rotor test of the ALL-TEST PRO ® 31,
the analytical and trending power of the ALL-TEST IV PRO ™ , and the motor management
capabilities of the EMCAT PRO ™ software. EMCAT PRO ™ software supports AC and DC
motors of all types, as well as coils, transformers, and even single phase motors. Used
together, these tools deliver unparalleled capability to both new and established predictive,
preventive and reliability based maintenance programs.
Includes: ALL-TEST IV PRO
™ analyzer, ALL-TEST PRO ® 31, manuals and guidebooks,
leads, chargers, cases, EMCAT PRO ™ software (requires Windows XP or greater), Condition
Calculator ™ software, an ATF-11 armature test fixture and an M2000 training motor.
ATPOL II – ALL-TEST PRO ® OL II (On-line testing) adds the power of Electrical Signature
Analysis and Power Analysis to the Professional System (see above).
© ALL-TEST Pro, LLC 2010. All rights reserved.
Specifications:
Resistance: 1 to 999 Ω 1
Impedance: 1 to 999 Ω 2
Inductance: 1 to 9999mH 3
Phase Angle: 9-90 degrees (whole number)
Current/Frequency Response (I/F): 0-99% (whole number)
Capacitance: 0.2 μF to 200 μF
Insulation Resistance: 0.1 to >99 MΩ, 500 and 1000V test voltages
Measurement Repeatability: +-1% for all parameters except as noted below
Phase Angle- +-1 degree
Current/Frequency Response (I/F) +-1 digit
Capacitance- +-5%
Insulation Resistance- +-5%
Test Frequency: 100, 200, 400, 800 Hz
Display: 3-line alphanumeric LCD with backlight
Size: 4.8 x 9.92 x 2” (122 x 252 x 50 mm)
Weight: 1.7 lb/0.75 kg
Power: Internal NiMH rechargeable battery pack
1 Auto & Manual mode displays from 0.001 to 999
2 Manual mode displays from 0.001 to 999
3 Manual mode displays from 0.001 to 9999mH
AT122010
Specifications subject to change without notification.