Atec Electrom-iTIGII Series - Manual (Page 2)

▶ Superior High Frequency 50/60Hz Surge Pulses.
This eliminates ionization dissipation present in
lower frequency surge testers. As a result, the
iTIG II finds weak insulation at lower voltages than
low frequency testers and better simulates motor
operating conditions with line frequency pulses.
▶ Automatic Quick Surge™ and Surge Guard™
Enables the user to push a button and let the iTIG
II run the test with a controlled and limited number
of pulses. Surge waveform ranges are automatically
set for all models; no need to push buttons or turn
dials.
▶ Compare Coils to Master Coil Coil testing mode
with easy comparison to a master coil is available.
Automatic calculation of differences and detection
of faults.
▶ Manual or Automated IR & Hipot Tests Includes
Meg, DAR, PI and Step Voltage tests. Multi-point
test graphs and comparisons to previous tests for
trend analysis is available.
SURGE AND HIPOT TESTS
MODELS RANGE FROM THE BASE MODEL A TO THE FULLY
AUTOMATIC MODEL D FOR WHICH ALL TESTS CAN BE DONE
THROUGH THE SAME LEAD SET.
Electrom Instruments • +1 720-491-3580 • [email protected] • www.electrominst.com