Atec Agilent-4395A-1D6-4396B - Manual (Page 15)

15
Agilent 4395A
Remote programming interface: GPIB
interface operates according to IEEE
488.1-1987 and IEEE 488.2-1987 and
IEC 625 standards.
I/O port: 8 bit I/O, 24 bit I/O
Printer: Centronics parallel I/O port
(Agilent PCL3)
Temperature: Operating
l , 0 °C to 40 °C;
storage, –20 °C to 60 °C
Humidity: Operating
1 15% < RH < 95%
Power: 100/120/220/240 V ±10%,
47 Hz to 63 Hz, 300 VA max.
Connectors: 50
Ω type-N(f)
Probe power: +15 V @ 300 mA, –12.6 V
@ 160 mA, GND
Display: 8.4 inch color TFT LCD
Weight: 21 kg (46 lb.) typical
Dimensions:
235 mm H x 425 mm W x 553 mm D
(9.25 in. x 16.75 in. x 21.72 in.)
Agilent 4396B
Remote programming interface: GPIB
interface operates according to IEEE
488.1-1987 and IEEE 488.2-1987 and
IEC 625 standards.
I/O port: 8 bit I/O
Printer: Centronics parallel I/O port
(Agilent PCL3)
Temperature: Operating
1 , 0 °C to 40 °C;
storage, –20 °C to 60 °C
Humidity: Operating
1 15% < RH < 95%
Power: 100/120/220/240 V ±10%,
47 Hz to 63 Hz, 300 VA max.
Connectors: 50
Ω type-N(f)
Probe power: +15 V @ 300 mA, –12.6 V
@ 160 mA, GND.
Display: 8.4 inch color TFT LCD
Weight: 21.5 kg (47 lb.) typical
Dimensions:
235 mm H x 425 mm W x 553 mm D
(9.25 in. x 16.75 in. x 21.72 in.)
1. Disk drive operating region: 10 °C to 40 °C and
15% to 80% RH.
MS-DOS ® is a registered trademark of Microsoft
Corporation.
Additional literature
For detailed specifications, refer to
the Agilent 4395A Data Sheet
(literature number 5965-9340E), or
Agilent 4396B Data Sheet
(literature number 5965-6311E).
General Characteristics
Agilent 4395A accessories selection guide
Agilent 4396B accessories selection guide
1. 100 kHz to 500 MHz
2. 7-mm test port (Option 87511A-800) or type-N test port (Option 87511A-001)
3. 300 kHz to 3 GHz 7-mm test port. To convert to type-N, use Agilent 11524A 7-mm to type-N (f) adapter
4. 300 kHz to 4 GHz
1. 7-mm test port. To convert to type-N, use Agilent 11524A 7-mm to type-N (f) adapter