Atec Agilent-4395A-1D6-4396B - Manual (Page 13)

13
Test sets, splitters,
and directional bridges
S-parameter test sets allow both for-
ward and reverse measurements with
a single connection of your DUT.
Agilent 87511A – 50 Ω S-parameter
(100 kHz to 500 MHz), 7-mm test port
(Option 87511A-800) or type-N test
port (Option 87511A-001)
Agilent 87511B – 75 Ω S-parameter
(100 kHz to 500 MHz), type-N test port
Agilent 85046A – 50 Ω S-parameter
(300 kHz to 3 GHz), 7-mm test port 1
Agilent 85046B – 75
Ω S-parameter
(300 kHz to 2 GHz), type-N test port
Agilent 85046A
Transmission/reflection (T/R) test kits
allow measurements in one direction
only. Includes test set, short, load, and
DUT return cable.
Agilent 87512A
Agilent 87512A 50 Ω (dc-2 GHz)
type-N connectors
Agilent 87512B 75
Ω (dc-2 GHz)
type-N connectors
These type-N power splitters allow
transmission measurements only in
a single direction.
Agilent 11850C 50 Ω 3-way power
splitter (dc-3 GHz)
Agilent 11850D 75
Ω 3-way power
splitter (dc-2 GHz)
Agilent 11667A 50 Ω 2-way power
splitter (dc-18 GHz)
These high-directivity RF bridges
are designed for accurate reflection
measurements and signal-leveling
applications.
Agilent 86205A 50 Ω RF bridge
(300 kHz to 6 GHz)
Agilent 86207A 75 Ω RF bridge
(300 kHz to 3 GHz)
4. Calibration kits
A complete line of kits make calibrat-
ing your analyzer fast and easy.
Agilent 85031B 50
Ω, 7-mm
Agilent 85032B 50 Ω, type-N
Agilent 85033D 50 Ω, 3.5-mm
Agilent 85036B 75 Ω, type-N
5. Accessory kits
These kits furnish RF components
generally required for use with test
sets and splitters.
Agilent 11853A 50 Ω, type-N short
circuits and adapters
Agilent 11854A 50 Ω, type-N to
BNC adapters
Agilent 11855A 75 Ω, type-N
terminations and adapters
Agilent 11856A 75
Ω, type-N to
BNC adapters
6. Cable kits
For reliable connections between the
test set and the DUT.
Agilent 11851B 50 Ω type-N RF cable kit
(for type-N splitters or T/R test sets)
Agilent 11857B 75 Ω type-N test port
return cables
Agilent 11857D 50
Ω 7-mm test port
return cables
1. To convert test port to type-N, use Agilent
11524A 7-mm to type-N(f) adapter.
S-parameter test sets allow both for-
ward and reverse measurements with
a single connection of your DUT.