Atec Anritsu-S332D-31D - Manual (Page 3)

3
Snap-in Field replaceable
battery location
RS-232 Interface
Transfer stored data to and from
a personal computer (PC) or
download to a printer via a serial
cable for further analysis. Use PC
to automatically control and collect
data in the field.
TFT Color Display
Standard TFT (640 x 480) color
display featuring variable
brightness control.
Viewable in direct sunlight.
Rugged and Reliable
Chassis Design
Ruggedized, lightweight,
compact, high-impact housing is
designed to withstand repeated
drops and rough handling.
Weather resistant seals and
rubber membrane keypad
protect unit from dirt and
moisture.
Function Keys
Four dedicated function keys simplify
measurement tasks.
External DC
Power Port
Multilingual User Interface
Multi-language user interface
features on-screen menus and
messages in six different
languages: Chinese, English,
French, German, Japanese,
Spanish.
Save and Recall Display
Up to 200 memory locations.
Alphanumeric data labeling
and automatic time/date stamp
simplify data management.
Limits
Create simple pass/fail
measurements with a single limit
line, upper and/or lower mask
limit lines.
Markers
Six markers for more
comprehensive measurements.
Save and Recall Setup
Save setups for fast
repeatable testing:
S332D Models - 20
S331D Models - 25
T1/E1 Receive and Transmit Port
S331D Models with Option 50.
Frequency Converter Module Port
Option 6 (S332D) for control of an
external frequency extension module.
External Trigger and
External Reference In Cable and Antenna
Analyzer Port Spectrum Analyzer
and Power Meter Port
Soft Keys
Intuitive soft key menu
and user interface.
AM/FM Receiver
with Internal Speaker
Built-in AM/FM demodulator
enables testing and trouble-
shooting of wireless
communications systems.
An internal speaker and jack are
included.
Function Benefits
Cable and Antenna Analyzer (331D/S332D) Characterize antenna system and pinpoint location of faults
Spectrum Analyzer (S332D) Easily locate, identify and record various signals with high accuracy
AM/FM Demodulator (S332D) Built-in demodulator for AM, narrow band FM, wide band FM, and SSB allows technician to
listen to and identify interfering signals
Standard TFT Color Display (S331D/S332D) Display is viewable in direct sunlight
Power Monitor (S331D/S332D) Performs accurate broadband power measurements using an external detector
Frequency Converter Interface (S332D) Make measurement from 4.7 to 6 GHz using an external detector
Built-in Bias Tee (S332D) No need to use external power to bias an amplifier
Transmission Measurement (S332D) Identify and locate interfering signals that cause dropped calls and coverage problems.
Intermittent problems can be identified using spectrograms
Interference Analyzer (S332D) Identify and locate interfering signals that cause dropped calls and coverage problems.
Intermittent problems can be identified using spectrograms
Channel Scanner (S332D) Measure frequency, bandwidth and power of multiple transmitted signals
CW Signal Generator (S332D) CW source to test low noise amplifiers
Power Meter (S331D/S332D) Performs accurate power measurements up to 3 GHz without the need of an external detector
GPS Receiver (S331D/S332D) Provides location (latitude, longitude, altitude) and UTC time information
T1/E1 Analyzer (S331D) Simplifies the task of determining if the source of problems is on the wireline or the wireless side