Alpha Technologies Battery Racks - Manual (Page 4)

4
1.0 Introduction
These instructions detail the proper assembly of Alpha battery racks.
Note:
Use a crew of at least two persons trained in handling, installing, operating, and maintaining
batteries and battery systems to assemble the battery racks. Rack components must be
assembled and secured on-site in accordance with these assembly instructions and all applicable
codes and laws.
During assembly procedure, do not tighten the hardware until the final step. This will
prevent hole alignment problems due to tolerance stacking. Once the battery rack is
assembled, tighten all the hardware to its specified torque.
1.1 Tools required:
Chalk line
13mm wrench
Torque wrench (0-250 in-lbs)
13mm socket
Concrete drill with bit for anchor bolts (when applicable)
Level
Multimeter (grounding verification)
Measuring Tape
Note:
Inspect contents upon receipt. If items are damaged or missing, immediately contact Alpha
Industrial Power and the shipping company. Most shipping companies have only a short claim
period.
Do not proceed with the installation of the battery rack if parts are missing or damaged.