Alpha Technologies Battery Racks - Manual (Page 11)

11
2.4.5 Installation of middle support rail (if required)
2.4.6 At this time, verify or torque all hardware to 75 in-lbs (8Nm)
2.4 Installation is now complete for
Standard battery racks and the rack is ready for
battery installation. Follow the battery layout provided for you installation to install the
battery system.
Note:
For Seismic battery rack installation continue to section 3.0
One or more mid-support rails
may be required. Space
evenly between outside rails
Install procedure same as
outside rails. (2.4.1 & 2.4.2)