Alpha Technologies BD-8 - Manual (Page 24)

3. Installation
24 031-032-C2-002 Rev. B
Fig 3-9 BD-8 Battery Drawer
3.6.4 Battery Connection
Tools Needed:
Two 7/16” open end wrenches
Procedure:
Note: The BD-8 battery enclosure is an option, and may not be present.
3.6 Battery Installation, continued
1. Place batteries on the PN-6 battery trays, as shown in Fig. 3-10 or 3-11.
2. If the BD-8 enclosure is used, route the cables through the opening in the
right front corner of the enclosures.
3. Connect the battery packs to the Battery Interface Unit at the top of the right
side of the PN-6 enclosure.