Alpha Technologies BD-8 - Manual (Page 16)

3. Installation
16 031-032-C2-002 Rev. B
Fig. 3-2 Enclosure Lifting Methods
The PN-6 cabinet as shipped, is extremely heavy. A safe means of
transportation to the site and a safe procedure for unloading the enclosure is
necessary. Do not transport or lift with a device that may not be able to bear the
unit's weight, and do not place the unit upon a surface that will not be able to fully
support it. Verify that the transport path is free of obstructions.
NOTE: Enclosure must always remain in the upright position during the
shipping, storage and installation process. Damage may result from
enclosure being shipped or stored on its side.
NOTE: Electronic modules, batteries or other components must NOT be
installed until the enclosure is securely set in place at its permanent
location.
3.2 Transportation and Lifting