Alpha Technologies AlphaGen DCX3000 Honda - Manual (Page 58)

56
TAKING CARE OF UNEXPECTED PROBLEMS
GENERATOR PROBLEMS
Possible Cause Correction No Power at the
DC Output Coupler
Output indicator is
OFF, and overload
indicator is ON.
Setting different
voltage connected
to the UPS.
Power cord
connected to UPS
battery string in
reverse polarity.
Faulty generator.
Check output
and overload
indicator.
Check UPS
battery string
voltage
requirement.
Check the power
cord.
Take generator
to an authorized
Alphagen
servicing dealer,
or refer to shop
manual.
Check DC load.
Stop and restart
the engine.
Check the cooling
air inlet. Stop and
restart the engine.
Turn OFF the
engine switch and
set the voltage
selector switch to
the same battery
string voltage of
the UPS (p. 13).
Make sure
generator positive
output side of
coupler is
connected to
positive terminal
of UPS battery
string.
Replace or repair
faulty components
as necessary. 1.
2.
3.
4.
08/03/28 11:19:57 31ZS9700_057