beautypg.com

ABUS FU8030 Secvest 2WAY Ethernet Module User Manual

Page 11

background image

11

1. Remove both screws

on the housing

base.

2. Lift the housing carefully off the wall

mounting plate.
Detach the ribbon cable from the wall
mounting plate before you open the
housing fully.

3. Release all four screws holding the

housing of the centre together (1).

4. Detach the plug connection for the

speaker and the connector for the battery
compartment (2).

5. Before completely removing the rear

housing panel, lift it slightly and pull out
the siren plug.