beautypg.com

ABUS FU8370 Secvest 2WAY Wireless Glass Breakage Detector User Manual

Page 17

background image

17

electrical devices, especially computers,
photocopiers or communication devices. Note:
Wireless conditions and malfunctions can change
over time, meaning no guarantees can be given for
a specific transmission range.

Installation

1. Open the housing by pressing the side of the detector

base and removing the cover.

2. Attach the base

to the desired position on the wall or

ceiling.

3. Insert the enclosed 3 V CR2 lithium battery correctly.

4. To deactivate the internal LED, connect the jumper on

contact LK3 on one pin only.

5. If the green cable is connected to the screw clamp block

contact marked “Alarm”, jumper contact LK1 must be
open.

6. When connecting the detector, ensure that the tamper

contact is correctly positioned.