AAEON IMBM-Q67A - Manual (Page 52)

3-20 IMBM-Q67A
3.7 Tools menu
The Tools menu items allow you to configure options for special functions. Select
an item then press to display the submenu.
3.7.1 EZ Flash 2 Utility
Allows you to run EZ Flash 2. Press [Enter] to launch the EZ Flash 2 screen.
3.7.2 SPD Information
DIMM Slot # [Slot 1]
Displays the Serial Presence Detect (SPD) information of the DIMM module
installed on the selected slot. Configuration options: [Slot 1] [Slot 2] [Slot 3] [Slot 4]
NOTES:
Slot 1: labeled DIMM_A1 on this motherboard;
Slot 2: labeled DIMM_A2 on this motherboard;
Slot 3: labeled DIMM_B1 on this motherboard;
Slot 4: labeled DIMM_B2 on this motherboard.
3.7.3 O.C. Profile
This item allows you to store or load multiple BIOS settings.
NOTE: The Setup Profile Status items show Not Installed if no profile is
created.
Save to Profile
Allows you to save the current BIOS settings to the BIOS Flash, and create a
profile. Key in a profile number from one to eight, press , and then select
Yes.
Load from Profile
Allows you to load the previous BIOS settings saved in the BIOS Flash. Key in the
profile number that saved your CMOS settings, press , and then select
Yes.