AAEON IMBM-Q67A - Manual (Page 25)

2-17 Chapter 2: Motherboard information
CAUTION: Do not forget to connect the fan cables to the fan connectors.
Insufficient air flow inside the system may damage the motherboard
components. These are not jumpers! Do not place jumper caps on the fan
connectors!
NOTES:
• The CPU_FAN connector supports a CPU fan of maximum 2A (24 W) fan
power.
• Only the 4-pin CPU fan support the Q-Fan feature.
4. CPU and chassis fan connectors (4-pin CPU_FAN, 3-pin CHA_FAN)
Connect the fan cables to the fan connectors on the motherboard, ensuring
that the black wire of each cable matches the ground pin of the connector.
5. LPT connector (26-1 pin LPT)
The LPT (Line Printing Terminal) connector supports devices such as a printer. LPT is
standardized as IEEE 1284, which is the parallel port interface on IBM PC-compatible
computers.
IMBM-Q67A
IMBM-Q67A Fan connectors
CHA_FAN
CPU_FAN
CPU F
AN PWM
CPU F
AN SENSE
CPU F
AN VCC
GND
GND
+12V
Rotation
IMBM-Q67A
IMBM-Q67A Parallel port connector
PIN 1
LPT
SLCT
PE
BUSY
ACK#
PD7
PD6
PD5
PD4
PD3
PD2
PD1
PD0
STB#
GND
GND
GND
GND
GND
GND
GND
GND
SLIN#
INIT#
ERR#
AFD