AAEON IMBM-Q67A - Manual (Page 40)

3-8 IMBM-Q67A
Turbo Mode [Enabled]
Allows you to enable or disable the Intel
® Turbo Mode Technology.
[Enabled] Allows processor cores to run faster than marked frequency in
specific condition.
[Disabled] Disables this function.
CPU C1E [Auto]
Enables or disables the C1E support function. This item should be enabled in
order to enable the Enhanced Halt State. Configuration options: [Auto] [Enabled]
[Disabled]
CPU C3 Report [Auto]
Allows you to disable or enable the CPU C3 report to the operating system.
Configuration options: [Auto] [Enabled] [Disabled]
CPU C6 Report [Auto]
Allows you to disable or enable the CPU C6 report to the operating system.
Configuration options: [Auto] [Enabled] [Disabled]
3.4.3 System Agent Configuration
VT-d [Disabled]
[Disabled]
Disables the Intel Virtualization Technology for Directed I/O.
[Enabled] Enables the Intel Virtualization Technology for Directed I/O.
Initiate Graphic Adapter [PEG/PCI]
Allows you to decide which graphics controller to use as the primary boot device.
Configuration options: [iGPU] [PCI/iGPU] [PCI/PEG] [PEG/iGPU] [PEG/PCI]
iGPU Memory [64M]
Allows you to set the iGPU memory size. Configuration options: [32M] [64M] [96M]
[128M] ~ [448M] [480M] [512M]
iGPU Multi-Monitor [Disabled]
Allows you to enable or disable the internal graphics device’s multi-monitor support
for add-on VGA devices. And the memory size for internal graphics device will
keep at 64MB. Configuration options: [Disabled] [Enabled]
3.4.4 PCH Configuration
High Precision Timer [Enabled]
Allows you to enable or disable the High Precision Event Timer.
Configuration options: [Enabled] [Disabled]