AAEON IMBM-Q67A - Manual (Page 44)

3-12 IMBM-Q67A
Realtek PXE OPROM [Disabled]
This item appears only when you set the Realtek LAN Controller item to
[Enabled] and allows you to enable or disable the PXE OptionRom of the Realtek
LAN controller. Configuration options: [Enabled] [Disabled]
ASM1061 Storage Controller [IDE Mode]
Allows you to enable or disable the ASM1061 storage controller. Configuration options:
[Disabled] [IDE Mode] [AHCI Mode]
NOTE: If you want to use the full function of the ASM1061 storage controller If you want to use the full function of the ASM1061 storage controller
(ex. AHCI), we recommend that you set this item to [AHCI Mode] and install the
ASM1061 Controller Driver from the motherboard support DVD.
Intel LAN Controller [Enabled]
[Enabled] Enables the Intel LAN controller.
[Disabled] Disables the controller.
NOTE: Disable ME subsystem before you disable the LAN controller.
Intel PXE OPROM [Disabled]
This item appears only when you set the previous item to [Enabled] and
allows you to enable or disable the PXE OptionRom of the Intel LAN
controller. Configuration options: [Enabled] [Disabled]
Serial Port Configuration
The sub-items in this menu allow you to set the serial port configuration.
Serial Port 1 [Enabled]
Allows you to enable or disable serial port (COM) 1. Configuration options:
[Enabled] [Disabled]
RS Mode [RS232]
Allows you to configure the serial communications standard of serial port (COM) 1.
Configuration options: [RS232] [RS422] [RS485]
Change Settings [IO=378h; IRQ=4]
Allows you to select the Parallel Port base address. Configuration options: [IO=378h; IRQ=4]
[IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4] [IO=2E8h; IRQ=3]
Serial Port 2 [Enabled]
Allows you to enable or disable serial port (COM) 2. Configuration options:
[Enabled] [Disabled]
Change Settings [IO=2F8h; IRQ=3]
Allows you to select the Parallel Port base address. Configuration options: [IO=378h; IRQ=4]
[IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4] [IO=2E8h; IRQ=3]