Cla-Val 790-01 - Manual (Page 5)

"E" N.P.T. "E" N.P.T.
"E" N.P.T.
"D"
DIA.
"B"
DIA.
"C"
6", 8",10" and 12" Flanged Style
When Ordering Please Specify:
1. Catalog No. 100-42 2. Valve Size 3. Fluid Being Handled 4. Fluid Temperature Range 5. Inlet Pressure Range
6. Outlet Pressure Range 7. Maximum Differential Pressure 8. Minimum Differential Pressure 9. Maximum Flow Rate
For other than standard ANSI flanges consult factory
Din drilling available on all sizes
3/8" N.P.T.
3 PORTS
"A" TYP.
"BB"
DIA.
FLOW
"CC"
2", 3", 4" and 6" Wafer Style
Design Specification
Sizes: 2, 3, 4, and 6 inch wafer style
6, 8, 10, and 12 inch flanged
6, 8, 10, 12 inch Victaulic
® Ends
End Detail Wafer: Fits ANSI B16.5 class 125,150,
250, and 300 flanges
End Detail Flanged: ANSI B16.5 class 150
(fits class 125) or
ANSI B16.5 class 300
(fits class 250)
End Detail Victaulic ® : Fits standard steel pipe
Operating Pressure: 720 psi maximum
Victaulic
® Ends - 300 psi max.
Maximum Differential: 150 psid continuous,
225 psid intermittent*
Reverse Pressure: 125 psid maximum
Temperature Range: 32 to 160 degrees F*
Flange Operating Pressure: Class 125-175 psi maximum
Class 150-275 psi maximum
Class 250-300 psi maximum
Class 300-720 psi maximum
Victaulic ® Ends Rating: 300 psi maximum
*Standard natural rubber 65 durometer in water service.
Temperature range depends on liner material. Higher differential pressure ratings available.
Performance Specification
Capacity: See Technical Data Sheet
Cf Factor: 0.9
Cavitation: See Technical Data Sheet
Rangeability: 500:1
Bearing Friction: No friction from slip-type
bearings
Material Specification
Body: 316L Stainless Steel
Flanges: (Slip on) Carbon Steel/Clear Cad. Plated
Bolt Kit:
Carbon Steel/Zinc Plated
Liner: Natural Rubber, 65 duro (standard)
Viton, EPDM, Nitrile, Silicone (available)
Liner Retainer: 316 Stainless Steel
Optional Materials
Escoloy 45D
Duplex Stainless Steel
Super Duplex Stainless Steel
Nickel Aluminum Bronze
Titanium
PO Box 1325 Newport Beach CA 92659-0325
Phone: 949-722-4800 Fax: 949-548-5441
CLA-VAL
CLA-VAL CANADA CLA-VAL EUROPE
4687 Christie Drive
Beamsville, Ontario
Canada L0R 1B4
Phone: 905-563-4963
Fax: 905-563-4040 Chemin dés Mesanges 1
CH-1032 Romanel/
Lausanne, Switzerland
Phone: 41-21-643-15-55
Fax: 41-21-643-15-50
© COPYRIGHT CLA-VAL 2011 Printed in USA
Specifications subject to change without notice. www.cla-val.com E-100-42 (R-3/2011)
Represented By:
NSF Approved 2" thru 12"
Dimensions (100-42 Main Valve)
Valve Size (Inches) 2 3 4 6 8 10 12
A 2 7 ⁄
8
3 9 ⁄
16
4 1 ⁄
8
5 1 ⁄
4
-- -- --
B -- -- -- 10 7 ⁄
8
14 3 ⁄
8
18 21 5 ⁄
8
BB 4 3 ⁄
8
5 7 ⁄
8
7 3 ⁄
8
9 13 ⁄
16
-- -- --
C -- -- -- 9 11 13 15 1 ⁄
4
CC 2 1 ⁄
2
3 1 ⁄
4
4 5 1 ⁄
2
-- -- --
D (ANSI 150) -- -- -- 11 13 1 ⁄
2
16 19
D (ANSI 300) -- -- -- 12 1 ⁄
2
15 17 1 ⁄
2
20 1 ⁄
2
E (Ports) NPT -- -- -- 3 ⁄
8
3 ⁄
8
1 ⁄
2
1 ⁄
2
Approx. Wt. (150 lbs.) 4 7 1 ⁄
2
14 58 115 190 290
Approx. Wt. (300 lbs.) 4 7 1 ⁄
2
14 87 155 250 375
Max. Continuous Flow (gpm) 224 469 794 1787 3177 4964 7148
Valve Size (mm for ANSI) 50 80 100 150 200 250 300
A 73 90 105 133 -- -- --
B -- -- -- 276 356 457 549
BB 111 149 187 249 -- -- --
C -- -- -- 229 279 330 387
CC 64 83 102 140 -- -- --
D (ANSI 150) -- -- -- 279 343 406 483
D (ANSI 300) -- -- -- 318 381 445 521
E (Ports) NPT -- -- -- 3 ⁄
8
3 ⁄
8
1 ⁄
2
1 ⁄
2
Approx. kg. (150 lbs.) 1.81 3.63 6.35 30 54.43 89 151.5
Approx. kg. (150 lbs.) with Studs & Nuts 2.72 4.54 10 -- -- -- --
Approx. kg. (300 lbs.) 1.81 3.63 6.35 41.73 72.57 116.57 191
Approx. kg. (300 lbs.) with Studs & Nuts 5 6.35 11.8 -- -- -- --
Max. Continuous Flow (l/s.) 14 30 50 113 200 301 451