Cla-Val 50-01KO/650-01KO - Manual (Page 3)

*SUGGESTED REPAIR PARTS
For a more detailed IOM Manual go to www.cla-val.com or contact a Cla-Val Regional Sales Office.
CLA-VAL
Copyright Cla-Val 2011 Printed in USA Specifications subject to change without notice.
P.O. Box 1325 • Newport Beach, CA 92659-0325 • Phone: 949-722-4800 • Fax: 949-548-5441 • E-mail: [email protected] • Website cla-val.com
©
N-50-01/650-01 (R-3/2011)
50-01/650-01 SCHEMATIC
CRL
COVER
PIPE PLUG
COVER BEARING
SPRING
STEM NUT
DIAPHRAGM WASHER
DISC RETAINER
BODY
* SPACER WASHERS
DISC GUIDE
SEAT
PIPE PLUG
STEM
SEAT O-RING
STUD
8" and Larger
* DIAPHRAGM
* DISC
* Repair Parts
Seat Screw
8" and Larger
(Globe or Angle)
PIPE PLUG
HEX NUT
8" and Larger
Cover Bolt
6" and Smaller
X42N-2 CK2
HYTROL MAIN VALVE
*
*
*
Ajusting Screw
(3/8" - 16UNF THREAD)
INLET
1/8 - 27 NPT
SENSING
CONNECTION
OUTLET
Cap
Screw, Adjusting
Nut Hex (Locking)
Cover
Guide, Spring
Spring
Washer, Belleville
Washer, Diaphragm
(Upper)
Screw Fil. Hd.*
Diaphragm*
Washer, Diaphragm
(Lower)
O-Ring, Stem*
Nameplate
Body, Powerunit
O-Ring, Body*
Body
Nut, Hex,Stem, Lower
Seat
O-Ring, Seat
Guide, Spring
Nut, Stem, Upper
*O-Ring, Stem
Stem
*Disc Retainer Assy.
1/2" or 3/4" NPT
(2 places)
BASIC COMPONENTS
1 100-01 Hytrol (Main Valve)
100-20 600 Series Hytrol (Main Valve)
2 X42N-2 Strainer Needle Valve
3 CRL Pressure Release Control
OPTIONAL FEATURES
B CK2 (Isolation Valves)
D Check Valves with Isolation Valve
F Remote Sensing
H Drain to Atmosphere
P X141 Pressure Gauge
S CV Speed Control (Opening)
V X101 Valve Position Indicator
CV
CDC-1
1
3
2 B
D
S
CRL adjust range (psi) Spring Color psi change per turn*
0 - 75 Red 8.5
20 - 200 Green 28
100 - 300
* approximate. Use gauge at valve inlet to set.
Chrome Vanadium 18
KO
DISC GUIDE
STEM
KO
SEAT
Seat Screw
8" and Larger
KO Anti-Cavitation
Trim Option
**
**
** KO A NTI -C AVITATION T RIM CAN BE ADDED TO ANY STANDARD H YTROL V ALVE
X140-1
Security Cap
Option