Pump Solutions Group Neptune Series 6000 dia-PUMP MODELS 6100 thru 6250 User Manual
Page 18
18
SECTION VII
SPECIAL INSTRUCTIONS FOR SERIES 6000 “dia-PUMPS”
WITH ELECTRONIC STROKE CONTROL MODEL #SM-1020
Neptune Electronic Stroke Control Unit adjusts the capacity of the 6000 Series Pump over its full
operating range by changing the stroke length in response to an external signal. Manual hand crank is
optional.
Neptune Electronic Stroke Control consists of a Linear Actuator with required fittings and Adapters
needed to mount the Actuator on a Neptune 6000 Series Pump. The stroke control is mounted to the
pump prior to shipment.
Drawing#004253
An optional Remote Control Station is available for use with the Stroke Control to permit remote
Manual control and Remote indication of the Pump capacity settings.
For installation, Calibration setting, maintenance and troubleshooting, see “NEPTUNE ELECTRONIC
STROKE CONTROL INSTRUCTION manual”.