Extron Electronics SW RGBHV Series User Guide - Manual (Page 39)

Specifications, cont’d
SW RGBHV Series Switchers • Specifications and Part Numbers A-2
Specifications
Video
Gain ............................................... Unity.
Bandwidth .................................... 350 MHz (-3 dB)
Crosstalk ....................................... -70dB @ 10 MHz
Switching speed ........................... 5 ms (max.)
Video input
Number/signal type
SW2 RGBHV/RGBHV A 2 RGBHV, RGBS, RGsB, RsGsBs, HDTV component video, S-video,
composite video (or digital audio)
SW4 RGBHV/RGBHV A 4 RGBHV, RGBS, RGsB, RsGsBs, HDTV component video, S-video,
composite video (or digital audio)
SW6 RGBHV/RGBHV A 6 RGBHV, RGBS, RGsB, RsGsBs, HDTV component video, S-video,
composite video (or digital audio)
Connectors
SW2 RGBHV/RGBHV A 2 x 5 female BNC
SW4 RGBHV/RGBHV A 4 x 5 female BNC
SW6 RGBHV/RGBHV A 6 x 5 female BNC
Nominal level ............................... 1.0 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
Minimum/maximum levels ...... Analog: 0.3 V to 1.5 Vp-p with no offset
Impedance .................................... 75 ohms
Return loss .................................... <-30 dB @ 10 MHz
DC offset (max. allowable) ......... 5.0V
Input coupling .............................. DC
Video output
Number/signal type ................... 1 RGBHV, RGBS, RGsB, RsGsBs, HDTV component video, S-video,
composite video (or digital audio)
Connectors .................................... 5 BNC female
Nominal level ............................... 1.0 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
Minimum/maximum levels ...... 0.5 V to 1.5 Vp-p (follows input)
Impedance .................................... 75 ohms
Return loss .................................... <-30 dB @ 10 MHz
DC offset ....................................... ±5 mV maximum with input at 0 offset
Sync
Input type ..................................... RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level sync
Output type .................................. RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level sync
Input level ..................................... Analog or TTL, 0.5 V to 5.0 Vp-p
Output level .................................. 5.0 Vp-p, unterminated, for V output; H output follows input.
Input impedance .......................... 510 ohms for V input and unselected H input; the selected H input
impedance is determined by the device connected to the H output.
Output impedance ...................... 75 ohms for V output; the H output impedance is determined by the device
connected to the selected H input.
Max input voltage ....................... 5.0 Vp-p
Max. propagation delay .............. 35 ns
Max. rise/fall time ....................... 4 ns
Polarity .......................................... Positive or negative (follows input)