Extron Electronics QSD 204_204D User Guide - Manual (Page 5)

2 Output Configuration menu
3 Advanced Configuration menu
4 Exit menu
Extron
QSD204D
OUTPUT
CONFIG
MENU
NEXT
SIGNAL
RGB
H SYNC V
NEG POS
NEXT NEXT NEXT
INPUT
CONFIG
MENU
Output video types
• RGB (default)
• YUV
• RGsB Sync polarity combinations
• H-/V- (default)
• H-/V+
• H+/V-
• H+/V+
NOTE This submenu is only active for RGB.
If the signal type was specified as
RGsB or YUV in the previous submenu,
the sync polarity submenu will not display.
SERRATION
ON
Serration pulse removal
• Off (default)
• On
NOTE When set on, serration pulses are
removed from the output vertical sync
pulse. LCD, DLPs, and plasma displays
must have the serration pulses removed
from the sync signal in order to display
properly. Flagging or bending at the top of the
video image is a sign that the serration pulses
should be removed.
2
EXTRON
QSD204D
OUTPUT
CONFIG
MENU
INPUT
CONFIG
MENU
ENH MODE
ON
NEXT
ADVANCED
CONFIG
MENU
DETAIL
016
NEXT
FILTER
OFF
NEXT
BLUEMODE
ON
NEXT
AUTOSW
ON
NEXT
NEXT
Either Adjust knob is used
to adjust the submenus
Detail (sharpness)
• Ranges from 0 to 63.
(default is 16)
Filter
• On (default)
• Off
Display blue and sync only
• On
• Off (default)
Autoswitch mode
• On
• Off (default)
Enhanced mode (gain control)
• Off (default)
• On
3
EXTRON
QSD204D
MENU
INPUT
CONFIG
MENU
ADVANCED
CONFIG
EXIT
MENU
MENU
MENU
NEXT
4