Extron Electronics QSD 204_204D User Guide - Manual (Page 36)

Serial Communication, cont’d
QSD 204 • Serial Communication 3-6
Enable (lock image adjustments) 1X Exe1 Lock front panel adjustments;
adjust image via RS-232 only.
View the executive mode status X Exe X16 Show executive mode status.
Example: X Exe0
Firmware version, part number & information requests
Query firmware version number Q Ver X8 Show the controller firmware
version.
Request part number N N60-501-0_ Show the decoder’s part #.
Request general info. I (See below) Show the decoder’s status.
C X1 •Typ X4 •Std X12 •Sdi X1
Zap (reset to default settings)
Zap image adjustments/controls Esc zI ZapI Reset the image adjustments
to factory settings.
Zap all QSD 204 settings/memories Esc zXXX ZapXXX Reset everything: all settings,
and adjustments to the factory
default.
Command/response table for SIS commands (continued)
Command ASCII Command Response Additional description
(host to decoder) (decoder to host)