Extron Electronics QSD 204_204D User Guide - Manual (Page 35)

3-5 QSD 204 • Serial Communication
View the brightness value Y Brt X10 Show the brightness setting.
Detail mode
Set the detail level X13 D Det X13 Specify the detail level.
View the detail value D Det X13 Show the detail setting.
Horizontal shift
Set horizontal position X10 H Hph X10 Specify the horizontal position.
Increment +H Hph X10 Shift right.
Decrement -H Hph X10 Shift left.
View the horizontal pos. value H Hph X10 Show the horizontal position.
Vertical shift
Set the vertical position X10 / Vph X10 Specify the vertical position.
Increment up +/ Vph X10 Shift up.
Increment down -/ Vph X10 Shift down.
View the vertical pos. value / Vph X10 Show the vertical position.
Top blanking
Specify a top blanking value X17 ( Blt X17 Set the number of lines to
blank at the top of the picture.
Increase the top blanking value +( Blt X17 Increase the # of top lines
blanked.
Decrease the top blanking value -( Blt X17 Decrease the # of top lines
blanked.
View the top blanking value ( Blt X17 Show the number of lines that
are blanked at the top of the
picture.
Bottom blanking
Specify a bottom blanking value X17 ) Blb X17 Set the number of lines to
blank at the bottom of the
picture.
Increase the bottom blanking value +) Blb X17 Increase the number of lines
blanked at the bottom.
Decrease the bottom blanking value-) Blb X17 Decrease the number of
bottom lines blanked.
View the bottom blanking value ) Blb X17 Show the # of bottom lines
that are blanked.
Freeze
Enable 1F Frz1 Output a “frozen” video
image.
Disable 0F Frz0 Turn off freeze (output
motion).
View the freeze status F Frz X2 Show the freeze status.
Example: F Frz0
Executive mode
Disable 0X Exe0 Adjustments & selections can
be made from the front panel.
Command/response table for SIS commands (continued)
Command ASCII Command Response Additional description
(host to decoder) (decoder to host)