Extron Electronics SW8_12 VGA Ars User Guide - Manual (Page 12)

2-3 SW8/12 VGA Ars • Installation and Operation
Mounting instructions
Rack mounting requires the included MBD 149 1U, through-desk and rack
mounting kit (part #70-077-03).
Rack mount an SW8/12 VGA Ars unit as follows:
1 . If present, remove the four rubber feet from the bottom of the unit.
2 . Use four supplied 8-32 x 5/16" long screws to secure a mounting bracket to
each side of the unit (figure 2-1).
3 . Use four supplied 10-32 x 3/4" long screws to secure the bracket to the rail.
Rack Mount
Bracket
Bracket
Screws
Mounting
Screws
Mounting
Screws
Figure 2-1 — Rack mounting the switcher