Extron Electronics RGB 202xi VTG User Guide - Manual (Page 20)

RGB 202 Rxxxxxiiiii, RGB 202 Rxxxxxiiiii VTG • Specifications
Specifications, cont’d
RGB 202 Rxxxxxiiiii, RGB 202 Rxxxxxiiiii VTG • Accessories and Part Numbers A-4 A-5
Included Parts
These items are included in each order for a RGB 202 Rxi or a
RGB 202 Rxi VTG:
Included parts Part number
RGB 202 Rxi/RGB 202 Rxi VTG 60-327-01/60-328-01
3.5 mm, 5-pole captive screw connector 10-319-10
RGB 202 Rxi/202 Rxi VTG User’s Manual 68-500-01
Rubber feet
IEC power cord
Windows-based control software 29-035-01
Tweeker
Optional Accessories
Accessories Part number
Under-desk mounting bracket kit 70-077-01
Through-desk mounting bracket kit 70-077-02
1U rack shelf 60-190-01
3.5 mm stereo plug 10-306-01
Installation cable
(bulk 14-conductor, non-plenum) 22-120-02
Installation cable
(bulk 17-conductor, plenum) 22-111-03
Cables
Monitor breakout cables Part number
MBC VGA/XGA HR 26-162-01
MBC Mac/Quadra 26-018-01
MBC Sun Sparc HR 26-424-01
MBC SGI/13W3 HR 26-425-01
Control/remote — interface
Serial control port ........................ RS-232, 9-pin female D connector (also
used for contact closure)
Baud rate and protocol ............... 9600, 8-bit, 1 stop bit, no parity
Serial control pin configuration .. 2 = TX, 3 = RX, 5 = GND
Contact closure ............................ 1 9-pin female D connector (also used for
RS-232)
Contact closure pin configuration . 1 = input #1, 4 = input #2, 5 = GND
Program control ........................... Extron’s control program for Windows
Extron’s Simple Instruction Set ™ – SIS ™
General
Input power .................................. 100VAC to 240VAC, 50/60 Hz, 18 watts,
internal, auto-switchable
MBC power jacks ......................... 9.0VDC, 0.15A
Temperature/humidity .............. Storage -40° to +158°F (-40° to +70°C) /
10% to 90%, non-condensing
Operating +32° to +113°F (0° to +45°C) /
10% to 90%, non-condensing
Rack mount ................................... Yes, with an optional rack shelf (part
#60-190-01)
Furniture mount .......................... Yes, with an optional under-desk
mounting kit (part #70-077-01) or
through-desk mounting kit (part #70-077-
02)
Enclosure type .............................. Metal, vented
Enclosure dimensions ................. 1.75" H x 8.75" W x 8.0" D (1U high, half
rack width)
4.4 cm H x 22.2 cm W x 20.3 cm D
with rear BNCs ........ D = 8.4" (21.3 cm)
(Depth excludes knobs.)
Product weight ............................. RGB 202 Rxi ................. 2.2 lbs (1.0 kg)
RGB 202 Rxi VTG ..... 2.3 lbs (1.0 kg)
Shipping weight ........................... 5 lbs (2.3 kg)
Vibration ....................................... ISTA/NSTA 1A in carton (International
Safe Transit Association)
Listings .......................................... UL, CUL
Compliances ................................. CE, FCC Class A
MTBF ............................................. 30,000 hours
Warranty ....................................... 3 years parts and labor
Specifications are subject to change without notice.