Extron Electronics TP T 15HD 45, TP T A 45 User Guide - Manual (Page 21)

TP T 15HD 45 and TP T A 45 • Reference Information A-3
Nominal level ................................ 1 Vp-p for Y of component video and
S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of
component video
0.3 Vp-p for C of S-video
Minimum/maximum levels ........ 0.3 V to 1.45 Vp-p with no offset at unity
gain
Impedance ...................................... 75 ohms
Horizontal frequency .................... 15 kHz to 130 kHz
Vertical frequency .......................... 30 Hz to 150 Hz
Return loss ...................................... <-30 dB @ 5 MHz
DC offset (max. allowable)........... 100 mV
Video output— refer to the TP Receivers Family User’s
Manual,
part #68-547-02.
Audio — audio models
Number/signal type ..................... 1 or 2 sets of analog proprietary signals
Connectors
TP T A 45 ............................. (1) 2-pin direct insertion captive screw
connector
All other models ................ 1 or 2 female RJ-45
Frequency response ...................... 20 Hz to 20 kHz, ±0.05 dB
THD + Noise .................................. 0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal
level
S/N .................................................. >63 dB at maximum output (unweighted)
Crosstalk ......................................... <-80 dB @ 1 kHz, fully loaded
Stereo channel separation ............ >66.6 dB @ 1 kHz
CMRR .............................................. >33 dB @ 20 Hz to 20 kHz
Audio input — audio models
Number/signal type
TP T 15HD A, TP T A 45 ... 1 stereo, unbalanced
TP T 15HD AV ................... 2 stereo, unbalanced
Connectors
TP T 15HD A, TP T A 45 ... (1) 3.5 mm mini jack
TP T 15HD AV ................... (1) 3.5 mm mini jack, 2 female RCA
Impedance ...................................... 5k ohms, unbalanced, DC coupled
Nominal level ................................ -10 dBV (316 mV)