Extron Electronics AAP 100 MD - Manual (Page 4)

Extron USA - West
Headquarters
+800.633.9876
Inside USA / Canada Only
+1.714.491.1500
+1.714.491.1517 FAX
Extron USA - East
+800.633.9876
Inside USA / Canada Only
+1.919.863.1794
+1.919.863.1797 FAX
Extron EMEA
+800.3987.6673
Inside Europe Only
+31.33.453.4040
+31.33.453.4050 FAX
Extron Asia
+800.7339.8766
Inside Asia Only
+65.6383.4400
+65.6383.4664 FAX
Extron Japan
+81.3.3511.7655
+81.3.3511.7656 FAX
Extron China
+400.883.1568
Inside China Only
+86.21.3760.1568
+86.21.3760.1566 FAX
Extron Middle East
+971.4.2991800
+971.4.2991880 FAX
© 2008 Extron Electronics. All rights reserved.
Installation, cont'd
12. Place the lid on the floor box and slide it away from the
hinge to engage the tabs on the box.
13. Reinstall the two previously removed screws, securing the
lid to the box.
13. Replace Screws
12. Slide
14. Reconnect power and cables, as necessary.
Optional Extron Architectural Adapter Plates
A variety of optional architectural adapter plates for
pass‑through connections may be ordered for the MD floor box
AAP bracket. Visit the Extron website at www.extron.com for
additional information.
The AAP bracket can have up to two architectural adapter plates
installed, depending on the configuration selected.
The following configurations of architectural adapter plates
could be installed in the MD floor box adapter plate:
• two single spaced AAPs
• one double spaced AAP