Extron Electronics MMX 32 VGA MTP User Guide - Manual (Page 23)

MMX 32 VGA MTP • Remote Control 18
Windows®-Based Control Program
The Universal Switcher Control Program is compatible with Windows 98 and later, and
provides remote control of the input selection for each output (including video/audio
breakaway), audio gain and attenuation adjustments, and front panel lock out.
Updates to this program can be downloaded from the Extron Web site
(
www.extron.com ).
Installing the software
The program is contained on the Extron Software Products DVD. Install the software as
follows:
1. Insert the DVD into the drive. The installation program should start automatically. If it
does not self-start, run Launch.exe from the DVD.
The Extron software DVD window appears (figure 16).
Figure 16. Software DVD Window
NOTE: Either select the product tab (page) and then select the switcher from the drop-
down list or from the group names; or, alternatively, select the software tab and
then select the switcher software listed on the page. Steps 2 through 4 detail
accessing the software page.
2. Click the Software tab (figure 16).
3. Scroll to the Universal Switcher Control Program and click Install (figure 17).
Figure 17. Software Installation