MJK Automation Shuttle Ultrasonic Level Transmitter and Sensor - Manual (Page 68)

68 GB Shuttle Manual 100316 SW 838023
Appendix
Changing the access code
Enter the access code (see page
58 ) and press 'Shift' + 'D'
Use the arrow keys to select a new access code:
Confirm the new setting:
The actual setting is shown immediately:
Shuttle ® is ready for a new selection of a password protect-
ed menu after pressing 'Enter'.
(Re-entering the access code is not necessary if a menu
selection is made within 5 minutes.)
Press 'Escape' if no further password protected menu
selections are needed …
... or confirm with 'Enter' that the changes should be saved,
whereupon Shuttle
® revert to normal read-out, and the next
password protected menu can be selected.
(Press 'Escape' if the changes should not be saved.)