MJK Automation Shuttle Ultrasonic Level Transmitter and Sensor - Manual (Page 24)

24 GB Shuttle Manual 100316 SW 838023
Display and keyboard
System alarm on relay 1
Shuttle ® reverts to normal read-out.
Select the time delay.
Select relay mode.
('n.c' = normally closed,
'n.o' = normally open).
Note: If 'n.c' is selected, Shuttle ® will also give alarm in case of power failure.
In this menu the time delay is set for the activation of relay 1 when a system error occurs
together with the reset position of the relay (normally open / normally closed):