Xylem AD200-1 VOICE ALARM AUTODIALERS - Manual (Page 13)

Global Water
800-876-1172
• globalw.com
- 13 -
IX) Specifications
a) Dimensions
Power source: 9-18VDC
Current draw (OPERATE mode - Stand By): 28mA
Current draw (OPERATE mode - Alarm): 100mA
Activation: 1) N/C Activation: N/C to “open” latch input. Dialer resets with close.
2) Voltage Activation: Min. +5VDC. Max. +28VDC. Dialer resets with loss
of activation voltage.
Max. digits for outgoing number: 28
Operating temperature range: -18 to 55 C (0 to 130 deg F)
Dimensions (inches): 6.0 x 4.0 x 1.5
Weight (ounces): 10 oz
Mounting: Wall or Flat Surface
Case Material: ABS
Color: White
Warranty: 1 Year
Note: Design and specifications subject to change without notice.
X) Dialer Accessories
WIRELESS: AD200-1/W - Wireless version AD200-1. Dialer includes wireless
pendant transmitter.
24V APPLICATION: AD200-1/F - For this option the dialer is configured to
operate at 24VDC to 32VDC max. All other
specifications apply.
WIRELESS AND 24VDC APPLICATIONS: AD200-1/W/F - Incorporates both
the wireless feature and the 24V application.
TC-1 TIMER CONTROL MODULE - Accepts a momentary N/C, N/O or voltage
trigger and holds the dialer on for about 6 minutes.
PP-1 BACKUP BATTERY PACK - Plugs into PP-1 port on all dialers. Contains
rechargeable batteries along with recharging circuit. Provides up to 24 hours of
backup stand by power.
AC-1 AC/DC ADAPTOR - Plugs into regular 110 volt AC outlet to provide the
dialer with the required 12 volt DC primary power. Can be manually wired to the
power leads from the dialer or plugged into the PP-1 port.
AVD-RTO REMOTE TURN OFF MODULE - Allows the receiving party to turn
off the dialer by pressing the star (*) key.
IR-1 ISOLATION RELAY - Converts alarm output voltage to N/C to provide
clean input trigger to dialer.
SR-1 LINE SEIZURE RELAY - Allows the dialer, when activated, to have
priority over any other telephone on the line.