YSI VisoTurb 700 IQ - Manual (Page 10)

Safety instructions VisoTurb
®
700 IQ (SW)
2 - 2 ba76039e01 01/2012
2.1 Authorized use
The authorized use of the VisoTurb
®
700 IQ (SW) comprises its use as
a turbidity sensor in the IQ S ENSOR N ET .
Please observe the technical specifications according to chapter 7
T
ECHNICAL DATA . Only operation according to the instructions in this
operating manual is authorized.
Any other use is considered to be unauthorized. Unauthorized use
invalidates any claims with regard to the guarantee.
CAUTION
The sensor warms up during operation in the air. Consequently,
pollution can collect in the vicinity of the measurement window
due to the evaporation of liquid. Therefore, avoid any lengthy
operation in the air.
CAUTION
Only connect and operate the sensor together with IQ S ENSOR N ET
accessories.
2.2 General safety instructions
The sensor left the factory in a safe and secure technical condition.
Function and
operational safety
The failure-free function and operational safety of the sensor is only
guaranteed if the generally applicable safety measures and the special
safety instructions in this operating manual are followed during its use.
The failure-free function and operational safety of the sensor is only
guaranteed under the environmental conditions that are specified in
chapter 7 T
ECHNICAL DATA .
The specified temperature (chapter 7 T ECHNICAL DATA ) must be
maintained during the operation and transport of the sensor.
CAUTION
The sensor may only be opened by specialists authorized by YSI.